Archive for August, 2013

the Fireplace Remodel, part 3

I’ve had the new stone fire place finished  for some time now and even the re-claimed barn wood mantel is installed.  We’ve spent some time looking at stone/granite for the ground level hearth but nothing has been decided upon.

Here are some progression pictures of the stone installation.

This is the start of the stone install.  On the bottom I setup a temporary wooden support shelve which is supported in the center with three wooden wedges.  This provided me a nice even surface and it served as spacer between the floor and the stone where the future hearth stone will be set.  This support will be removed once the mortar cures.

ImageThe next picture is the installed stone up to and around the mounting cleat that will hold the barn wood mantel.  Once again you can see a temporary wooden support above the fireplace insert.

IMG_1198

Further up the wall….and if you look real close at the cleat (sometimes called a French Cleat), I used some small spacer wedges to push up the cleat top in order to use the top of the cleat as a support for the next row of stone.  Between the cleat and the stone I placed some wax paper to prevent the two from sticking together.

IMG_1214

And now we have all the stone installed, along with the barn wood mantel.  The last row of stone at the top required about 1/3 of the top to be cut off with the tile saw.  It turned out pretty even and looks nice.

IMG_1233

The most important step in a nice clean installation is to take the time and lay out the stone on the ground before their installed.  Don’t grab them at random from the box and mortar directly to the wall.  Take the time to do a proper layout.  I can’t tell you how many times I rearranged the stones when they were laid out on the floor.   Making sure the color tone, stone size and texture were evenly spaced.  That time was well spent when you see the results.

I used Eldorado Stone – Mountain Ledge Panels

Once the hearth stone is installed.  I’ll update this post.